LiveShell W Firmware v3.0.0 Release Notes

This article provides the download link and the summary of changes for LiveShell W firmware v3.0.0 released on March 23, 2026. Refer to the Firmware Updating Guide or the video below for further instructions.

Warning

Warning: If you apply this firmware to a LiveShell W running firmware v1.4.1 or earlier, any overlay images and captions saved in your LiveShell W before the update will become unusable. If needed, back up your data (for example, by downloading the images) before applying the update.

This article provides the download link and the summary of changes for LiveShell W firmware v3.0.0 released on March 23, 2026. Refer to the Firmware Updating Guide or the video below for further instructions.

Warning

Warning: If you apply this firmware to LiveShell W running firmware v1.4.1 or earlier, any overlay images and captions registered in your LiveShell W will become unusable. Please backup the data before updating.

Download

LiveShell W Firmware v3.0.0

SHA256 hash 6CA37153D9F78AC8A046C06C15A07A10AABDD6397EACC212E798DF96B199E5DA
SHA1 hash 5F110E03648382E140DD2815BF7F5FCA0BA17AD0

How to update



Changes

New Features

  • Added clock overlay/caption feature.

  • Added Easy Setup feature. Provides a wizard-style guided setup to configure all necessary settings from the initial state.

  • Added Wi-Fi Easy Setup feature. SSID and password can be configured by scanning a QR code.

  • Added the ability to automatically apply a specific memory preset when the unit is booted.

  • Added left/right panning, L-only/R-only, L+R Mix (mono), and per-input delay compensation to the audio mixer.

  • Added eyedropper tool for chroma key color selection.

  • Added WebHook notification feature. WebHook messages can be sent on events such as boot, stream start/stop, upload completion, and Remote connect/disconnect.

  • Added automatic upload of recorded files to S3, FTP, and WebDAV. Supports transfer speed limiting and automatic retry.

  • Added recording file splitting by time duration.

  • Added the ability to browse file lists and download files from SD/USB media via LiveShell Studio. File download is not supported via Remote.

  • Added drag & drop support for adding image files to the Caption (telop) tab and edit dialog.

  • Added scheduled reboot feature. Automatic reboot can be configured at a specified time daily, weekly, or monthly.

Improvements

  • Added Safari support for PGM OUT preview on LiveShell Studio.

  • Improved performance of HDMI1/2 thumbnail display.

  • Device name is now shown in the browser tab title.

  • Streaming and recording status are now indicated by blue and red icons respectively on the upper-right tabs of LiveShell Studio.

  • Auto-start settings now allow reviewing the configured values.

  • Updated internal video processing architecture.

Bug Fixes

  • Fixed an issue where the caption (telop) name and layer name were not saved when pressing the save-all button for the caption without saving the names first.

  • Fixed a rare issue where set values could be lost or, in some cases, reset to defaults.

  • Fixed an issue where recording start would retry indefinitely on errors such as missing media or insufficient free space.

  • Fixed an issue where recording start retry could not be cancelled.

Incompatible changes

  • Text and images registered by the user in the caption (telop) feature in firmware revision v1.4.1 or earlier will become unusable after updating to this revision.

Changes

New Features

  • Added clock overlay/caption feature.

  • Added Easy Setup feature. Provides a wizard-style guided setup to configure all necessary settings from the initial state.

  • Added Wi-Fi Easy Setup feature. SSID and password can be configured by scanning a QR code.

  • Added the ability to automatically apply a specific memory preset when the unit is booted.

  • Added left/right panning, L-only/R-only, L+R Mix (mono), and per-input delay to the audio mixer.

  • Added eyedropper tool for chroma key color selection.

  • Added WebHook notification feature. WebHook messages can be sent on events such as device power is booted, stream start/stop, upload completion, and Remote connect/disconnect.

  • Added automatic upload of recorded files to S3, FTP, and WebDAV. Supports transfer speed limiting and automatic retry.

  • Added recording file splitting by time duration.

  • Added the ability to browse file lists and download files from SD/USB media via LiveShell Studio. File download is not available via Remote.

  • Added drag & drop support for adding image files to the Caption (telop) tab and edit dialog.

  • Added scheduled reboot feature. Automatic reboot can be configured at a specified time daily, weekly, or monthly.

Improvements

  • Added Safari support for PGM OUT preview on LiveShell Studio.

  • Improved performance of HDMI1/2 thumbnail display.

  • Device name is now shown in the browser tab title.

  • Streaming and recording status are now indicated by blue and red icons respectively on the upper-right tabs of LiveShell Studio.

  • Auto-start settings now allow reviewing configured values.

  • Updated internal video processing architecture.

Bug Fixes

  • Fixed an issue where caption (telop) name and layer name were not saved when saving the entire caption (telop) without first saving the names individually.

  • Fixed a rare issue where set values could be lost or reset to defaults value.

  • Fixed an issue where recording start would retry indefinitely when encountering errors such as missing media or insufficient storage space.

  • Fixed an issue where recording start retry could not be cancelled.

Incompatible changes

  • Images and captions registered by a user in firmware revision v1.4.1 or older will become unusable once after updating to this revision.